Monday, August 13, 2012

Used Carr Viafuge Pilot For Sale | Cell Harvester



Used Carr Viafuge Pilot For Sale

The Carr ViaFuge Pilot is designed for fast, gentle, small- to medium-scale cell harvesting and supernatant recovery. Capable of separating a wide variety of mammalian and insect cells with little to no damage, the ViaFuge Pilot offers intact cell recovery efficiencies in excess of 99% with non-detectable cell concentrations in clarified supernatant.  Simple Operation Cells are concentrated at the bowl wall while clarified supernatant is continuously discharged throughout the
separation process.  Once the bowl fills with cell concentrate to a capacity of 1.3 L, a simple manifold system and concentrate pump is utilized to recover the cells without breaking containment.  Subsequent cycles are performed for recovery of larger batch sizes.

Improved Product Processing Cellular damage can result in release of intracellular material such as DNA, which may increase downstream processing and in some cases impact product purity. Because the ViaFuge Pilot is gentle to cells, damage is minimized from the start of the process.  For supernatant recovery applications, filtration requirements downstream may be reduced. For cell harvesting applications, intact cell recovery will be increased.  Low-Shear Design the ViaFuge Pilot's unique design minimizes shear forces on cells. Incoming feed is matched to the bowl hubs rotational velocity, allowing fast, efficient harvesting of even the most shear-sensitive cells without causing cell damage.


http://www.ssllc.com/FindEquipment/ViewAllEquipment/ProdID/1532/Carr__Viafuge_Pilot_.aspx

Wednesday, August 8, 2012

Fryma VME-50 Vacuum Mixer


Fryma VME-50 Vacuum Mixer For Sale

The VME-50 is used for high viscosity vacuum mixing and dispersion, as well as the dispersion of minor liquid or powder ingredients into powder mixes.
• Model: VME-50
• Serial #: M16549
• Year: 1994
• 50 liter capacity
• Includes all Pictured Accessories

Click Here For Details:
http://www.ssllc.com/FindEquipment/ProcessingEquipment/ProdID/842/Fryma_VME50_Vacuum_Mixer.aspx



Kilian | Synthesis 700 | Tablet Press


Kilian | Synthesis 700 | Tablet Press

The Kilian Synthesis 700 is a tablet press is a mechanical device that compresses powder into tablets of uniform size and weight. A press can be used to manufacture tablets of a wide variety of materials, including pharmaceuticals and cosmetics.  To form a tablet, the granulated material must be metered into a cavity formed by two punches and a die, and then the punches must be pressed together with great force to fuse the material together.

Kilian Synthesis 700 Tablet Press:


• Mfg: Kilian
• Model: Synthesis 700
• Year: 2004
• IPT-B Tooled turret
• 63 stations
• max output of 753,000 tablets per hour
• Main compression force of 100kn
• Max die filling of 18mm

Click Here For Details:
http://www.ssllc.com/FindEquipment/ViewAllEquipment/ProdID/559/Kilian_Synthesis_700_Tablet_Press.aspx




Bohle PTM-300 | Bin Blender


Bohle PTM-300 | Bin Blender For Sale

• Manufacturer: L.B. Bohle
• Model: PTM 300
• Serial #: 0513841001
• MFG: 2006
• Rated Voltage Ub1: 3x460V/GND/60 Hz
• Control Voltage: 24 VDC
• Rated Power P: 1.4 kw
• Circuit Diagram No: E-114921-4
• Weight: 680 kg
• Safe Load: 250 kg
• Rated Current Ie: 2.75 A
• Full Load Current Imax: 3.23 A
• Max Fuse: 16 A
• UB 2 Battery Mode 24 VDC 88 AH

Includes All Pictured Mixing Vessels
• 50 LTR.Conical Bin S/N
• 100 LTR.Conical Bin S/N
• 200 LTR.Conical Bin
• 60 LTR. V Shell Bin
• 150 LTR.V Shell Bin

Click Here For Details:
http://www.ssllc.com/FindEquipment/ViewAllEquipment/ProdID/359/Bohle_PTM300__Bin_Blender__Pharma_Process.aspx




Niro Fielder PMA 65 High Shear Granulator

Niro Fielder PMA 65 High Shear Granulator For Sale

The PMA High Shear Granulator is a mixer suitable for high speed dispersion of dry powders, aqueous or solvent granulations and effervescent products. The Development Pilot scale PMA has the mixing bowl enclosed in a stainless steel base which also incorporates the operator control station. All electrical equipment is installed in a separate sealed enclosure mounted the machine base.

The overall concept of the New PMA-Compact stems from the common needs of consistent processing and ease of operation and cleaning. The mixing bowl is therefore shaped to wet granulate the widest range of products in a reproducible manner in respect of batch size, density and flow characteristics. Its shallow, wide diameter bowl guarantees a consistent product vortex and reduces any tendency towards product adhering to bowl walls.
Product yields are further improved by the positioning of mixer blades close to the bowl base. A typical 3 minute dry mix operation is followed by introduction of a granulation fluid under pressure using a spraying unit.  A free-flowing granulate is produced after 3-5 minutes, and the granules are then rapidly discharged.

System Details:
• Manufacturer: Niro Fielder
• Model: PMA 65
• SN: 8101
• Includes mixing blade, chopper blade and all pictured accessories
• Bowl Volume (Liters) 65
• Typical Weight@ 0.6 g/l (kg) 26
• Main Impeller (kW) 7.5
• Mixing Impeller (rpm) 40-400
• Granulator Motor (kW) 1.3/1.8
• Granulator Speed (50 Hz) (rpm) 1500/3000
• Granulator Speed (60 Hz) (rpm) 1800/3600
• Weight (approx.) (kg) 65

Click Here For Details:


http://www.ssllc.com/FindEquipment/ProcessingEquipment/ProdID/357/Niro_Fielder_PMA_65_High_Shear_Granulator.aspx

Kilian | Synthesis 700 | Tablet Press
A tablet press is a mechanical device that compresses powder into tablets of uniform size and weight. A press can be used to manufacture tablets of a wide variety of materials, including pharmaceuticals, cleaning products, and cosmetics. To form a tablet, the granulated material must be metered into a cavity formed by two punches and a die, and then the punches must be pressed together with great force to fuse the material together.

• Mfg:  Kilian
• Model: Synthesis 700
• Year: 2004
• IPT-B Tooled turret
• 63 stations
• max output of 753,000 tablets per hour
• Main compression force of 100kn
• Max die filling of 18mm

Thomas Accela Cota For Sale


Thomas 48 Accela Cota Coating System For Sale

The Thomas Engineering Accela Cota 48V" is ideal for aqueous, solvent, and sugar coating applications. The Cota 48V" offers high thermal efficiency with fast processing time.

System Details:

• Model: 48-V
• SN: 48-382

Utilities Requirements and Specifications:
• Electrical: 460 VAC/3Ph/60 Hz
• Compressed Air: 40 CFM at 90 PSI (clean and dry)
• Instrument Air: 10 CFM at 80-100 PSI

Coater Specifications:
• Pan Capacity: 150 Liters
• Pan Size: Ø48” x 36” Depth
• Mixing Baffles: 4
• Drive: 3 HP
• Pan Speed: 2 to 14 RPM
• Air Volume: 1200-2000 CFM
• Spray Guns: 3 – aqueous

Clearance Requirements:
• 24” above
• 72” front
• 40” sides and back

Main Parts:
• Pan Motor – Brook Hansen

Control Parts:
• Various SMC Parts – SMC Pneumatics Inc.
• Pushbuttons/sensors/switches – Telemecanique, Enercorp, Turck, Burgess, Sprecher &

Schuh:
• Magnehelic/Photohelic Gauges – Dwyer
• Transformers – Hammond
• Inverter – TB Woods
• Controller/Indicator – Fuji

Spray System Parts:
• Air Volume Booster – Fairchild
• Spray Gun/nozzles/disconnects – Spraying Systems Co., Swagelok
•Pump – Barnant
• Air Pressure Gauge – Foster
• Air Handling Unit Parts
• Actuator – Belimo
• Fan – New York Blower
• Air Monitor Station – Air Monitor Corp.
• Dust Collector – Torit
• Filters – Farr
• Furnace – Gas Master